VW Polo AW Rear Wiper Blade Delete
Fits: VW Polo AW
Please note we will not take responsibility for any damage caused during or after installation. This part has been tested with daily use in rainy England for the past year and has been assembled by hand to ensure proper functionality.
Tools and materials
- 13 mm socket
- T20 Torx bit
- Trim tool
- 10 mm socket
- Adhesive (supplied)
Steps
Step 1
Flip up the wiper arm cover, then remove the nut with a 13 mm socket and lift off the rear wiper arm.
Step 1 
Step 2
Remove the four T20 screws: two inside the tailgate pull handles and two in the access holes in the trim panel.
Step 2 
Step 3
Unclip and remove the interior boot trim, unplug the wiper motor, then remove the three 10 mm nuts and lift the motor out.
Step 3 
Step 4
Apply the adhesive around the hole in the glass and insert the blanking disc. Make sure you remove the protective film from the outside face of the disc.
Step 4 
Step 5
Clean the glass and you're done.
Step 5 
Step 6
That's it, your rear wiper removal kit is installed.
Step 6 