Global shipping available

VW Golf Mk7 Rear Wiper Blade Delete

Fits: VW Golf Mk7, VW Golf Mk7.5

Please note we will not take responsibility for any damage caused during or after installation. This part has been tested with daily use in rainy England for the past year and has been assembled by hand to ensure proper functionality.

Tools and materials

  • 13 mm socket
  • T25 Torx bit
  • Trim tool
  • 10 mm socket
  • Adhesive (supplied)

Steps

  1. Step 1

    Flip up the wiper arm cover, then remove the nut with a 13 mm socket and lift off the rear wiper arm.

    VW Golf Mk7 rear wiper arm with the cover lifted to reach the 13mm nut, fits 2012 to 2020
    VW Golf Mk7 rear glass with the wiper arm removed and the spindle left, fits 2012 to 2020
  2. Step 2

    Open the tailgate and remove the four T25 screws holding the interior trim.

    VW Golf Mk7 tailgate interior trim held by four T25 screws, fits 2012 to 2020
  3. Step 3

    Pull all the interior tailgate trims off, unplug the wiper motor, then remove the three 10 mm nuts and lift the motor out.

    VW Golf Mk7 tailgate with the trims removed and the rear wiper motor held by three 10mm nuts, fits 2012 to 2020
  4. Step 4

    Remove the rubber grommet from the hole in the glass.

    VW Golf Mk7 rear glass hole with the wiper motor and rubber grommet removed, fits 2012 to 2020
  5. Step 5

    Apply the adhesive around the hole in the glass and insert the blanking disc. Make sure you remove the protective film from the outside face of the disc.

    Factory Delete blanking plug bonded into the Audi A3 8V rear glass
  6. Step 6

    Clean the glass and you're done.

    VW Golf Mk7 GTI rear three quarter view with smoothed tailgate glass after rear wiper removal, fits 2012 2013 2014 2015 2016 2017 2018 2019 2020

Kits this guide covers