Global shipping available

Skoda Fabia Mk4 Rear Wiper Blade Delete

Fits: Skoda Fabia Mk4

Please note we will not take responsibility for any damage caused during or after installation. This part has been tested with daily use in rainy England for the past year and has been assembled by hand to ensure proper functionality.

Tools and materials

  • 13 mm socket and ratchet
  • T25 Torx bit
  • 10 mm socket
  • MS adhesive (supplied)

Steps

  1. Step 1

    Flip up the cover on the wiper arm, loosen the 13 mm nut with a ratchet and lift the wiper arm off.

    Skoda Fabia Mk4 rear wiper arm cap flipped up showing the 13 mm nut
  2. Step 2

    Open the tailgate and remove the T25 screw in the grab handle on the interior trim.

    Skoda Fabia Mk4 tailgate pull handle with the T25 trim screw
  3. Step 3

    Release the clips all the way around the interior trim panel, working round the edge, then lift the panel away to get to the inside of the tailgate.

    Skoda Fabia Mk4 tailgate with the interior cover removed and the clips released
  4. Step 4

    Unplug the electrical connector from the wiper motor. Remove the three 10 mm nuts holding the motor in place and lift it out, then pull the rubber bung out of the hole in the glass.

    Skoda Fabia Mk4 rear wiper motor held by three 10 mm nuts
  5. Step 5

    Apply the supplied MS adhesive around the hole in the glass and insert the blanking plug. Make sure you remove the protective film from the outside face of the plug.

    Skoda Fabia Mk4 rear glass hole ready for the blanking plug
  6. Step 6

    Clean the glass and you're done.

    Skoda Fabia Mk4 and Monte Carlo rear three quarter view with smoothed tailgate, fits 2021 2022 2023 2024 2025 2026

Kits this guide covers